The J5CREATE Wireless Extender for USB Cameras / Microphones / Speakers transforms your wired USB cameras, microphones, and speakers into a versatile wireless setup. Enjoy the freedom of an extended range up to 82 feet (25m) without the clutter of cables, perfect for any meeting room or streaming environment. This compact solution offers low-latency audio and video transmission and is compatible with Windows®, macOS®, and Chrome OS™ devices.

Key Features at a Glance

  • Converts wired USB cameras, microphones, and speakers to a wireless system.
  • Achieve wireless transmission over distances up to 82 ft. (25m).
  • Ensures a stable connection with a dedicated 5 GHz frequency.
  • Experience low-latency audio and video transmission.
  • Supports video resolutions up to 4K@30 (H.264) and 1080p@30 (MJPEG).
  • Compatible with Windows®, macOS®, and Chrome OS™ operating systems.

Untether Your USB Devices

Break free from cable limitations with this wireless extender. It allows you to transform your USB cameras, microphones, and speakers into wireless devices, providing flexibility in placement and reducing cable clutter. With a reliable transmission range of up to 82 feet (25m), you can set up your equipment exactly where you need it.

Reliable Audio & Video Performance

Utilizing a 5 GHz frequency, the J5CREATE Wireless Extender ensures a stable and secure connection for your audio and video transmissions. Enjoy low-latency performance and crystal-clear visuals with support for resolutions up to 4K@30 (H.264) or 1080p@30 (MJPEG), making your presentations and streams look professional.

Broad Device and OS Compatibility

Designed for wide-ranging use, this extender seamlessly integrates with your existing setup. It supports available USB-C® or USB™ Type-A ports and is fully compatible with Windows® 11 / 10, macOS® 10.10 or later, and Chrome OS™ systems, making it a versatile tool for diverse work and streaming environments.

Technical Specifications

System Requirements

  • Available USB-C® or USB™ Type-A port
  • Windows® 11 / 10
  • macOS® 10.10 or later
  • Chrome OS™

Special Notes

  • Display performance may vary based on environmental factors; solid, nonporous materials can affect signal range.
  • Audio-output priority on the Transmitter (TX) ports is: 3.5mm Speaker → USB™ Speaker/Microphone → USB™ Camera with Speaker/Microphone.
  • Transmitter (TX) and Receiver (RX) devices connect and pair automatically; connected USB™ cameras activate automatically.
Hardware

Warranty

2 Year Limited

Host Connector

RX│Receiver:
USB-C® or USB® Type-A port

Power Source

TX Transmitter:
1 - DC 5V/3A Power Adapter
RX│Receiver:
1 - Bus Power through USB-C®

LED Indicator

TX│Transmitter / RX│Receiver:

  • Red: Power on
  • Orange: Waiting to connect *TX and RX are connected, but the USB™ camera or USB™ Speaker/Microphone are not connect to TX USB™ port
  • Orange flashing light: TX / RX pairing
  • Green: TX / RX connected, and TX USB™ camera is enabled.

Pair Button

Pair Button
If TX are RX devices are close together but, the TX and RX device’s LEDs are red and or if they disconnect, please try turning on “pairing mode”. To turn on paring mode find the Pair button located on the bottom side of TX and RX device, push and hold the TX and RX device’s pairing button 5 seconds, the power LED will change orange and will blink for 1 minute. If TX and RX device are paired, the LED will turn green and will stop blinking.

Audio ON/OFF Switch

RX│Receiver:
Located on the RX device’s bottom side, the "Audio ON/OFF switch" quickly enables or disables audio
- Switch to ON: enables audio
- Switch to OFF: disables

Ports

TX│Transmitter:1 - USB-C® Power In
1 - USB™ Type-A Female (Camera)
1 - USB™ Type-A female (Speaker/Microphone)
1 - 3.5 mm Speaker Out

IR

N/A

Performance

Audio Channel

2.1 CH stereo

Display Output Supported Resolutions

H.264:2160p / 1080p / 720p / 480p / 240p @ 30 FPS
1080p @ 60 FPS
MJPEG:1080p / 720p / 480p / 240p @ 30 FPS
YUV:1080p / 720p / 480p / 240p

RF Output Power

+15 dBm ±1 dBm

Security (Encryption)

128/256-bit AES based encryption
WPA2 authentication protocol

IR Return Frequency

N/A

ESD Protection

N/A

OVP Protection

N/A

Wireless Protocols

Standard

IEEE 802.11ac

Frequency

5 GHz Band I, Band IV, CE Only Band I

Range

Up to 82 ft. (25 m)

Channel Width

80 MHz

Antenna Type

Transmitter (TX): External antenna x 2
Receiver (RX): Built-in antenna

Physical Specifications

Color

Black

Enclosure Type

Plastic

Cable Length

Receiver (RX): 6.5 in. (16.5 cm)

Product Height

Transmitter (TX): 0.9 in. (23 mm)
Receiver (RX): 0.83 in. (21 mm)

Product Width

Transmitter (TX): 3.74 in. (95 mm)
Receiver (RX): 2.63 in. (67 mm)

Product Depth

Transmitter (TX): 3.74 in. (95 mm)
Receiver (RX): 2.63 in. (67 mm)

Product Weight

Transmitter (TX): 3.95 oz (112 g)
Receiver (RX): 1.95 oz (55.5 g)

Operating Temperature

+32 to +104°F (0 to +40°C)

Operating Humidity

< 85% non-condensing

Storage Temperature

-4 to +122°F (-20 to +50°C)

Storage Humidity

< 85% non-condensing

Package Contents

  • 1 - JVW120 Wireless Extender for USB™ Cameras / Microphones / Speakers set (1 x Transmitter & 1 x Receiver)
  • 1 - DC 5V/3A Power Adapter
  • 1 - Hook and loop fastener
  • 1 - Quick Installation Guide (QIG)

Frequently Asked Questions

Q: What types of USB devices can the J5CREATE Wireless Extender make wireless?

A: This extender is designed to turn your wired USB cameras, microphones, and speakers into wireless devices.

Q: What is the maximum wireless transmission range of this extender?

A: The J5CREATE Wireless Extender offers a reliable wireless transmission range of up to 82 feet (25 meters).

Q: Which operating systems are compatible with this wireless extender?

A: It is compatible with Windows® 11 / 10, macOS® 10.10 or later, and Chrome OS™.

Loading WhatsApp button...